Accessories

Measuring Instruments

CM-3500d

Spectrophotometer (spectral type, top port)

Highly accurate benchtop instrument which can be controlled from a computer using Windows software

Accessories

Optional Accessories for CM-3500d

Transmittance Specimen Holder CM-A96

For precise positioning of transparent plates, films or other transparent samples for transmittance measurements. Holds the Glass Cells CM-A97 (2 mm), CM-A98 (10 mm), CM-A99 (20 mm) and the Disposal Plastic Cells CM-A CM-A130 (2 mm), CM-A131 (10 mm) and CM-A132 (20 mm) or the Flow Cell CM-A508 (10 mm) always in perfect and repeatable position for precise transmittance measurements.

Item Order Code: 1864-708

Transmittance Zero Calibration plate CM-A100

The Transmission Zero Calibration Plate CM-A100 is required to block the light path for zero calibration in transmittance measurement mode. The black and mat coating of the plate absorbs also stray light within the transmission chamber of the instrument.

Item Order Code: 1864-712

Glass Cell 2 mm CM-A97

Glass cell made of optical glass for precise transmittance measurement of transparent liquids. The optical path is 2 mm and therefore perfect for liquids with high optical density.

Item Order Code: 1864-709

Glass Cell 10 mm CM-A98

Glass cell made of optical glass for precise transmittance measurement of transparent liquids. The optical path is 10 mm and recommended for liquids with normal optical density.

Item Order Code: 1864-710

Glass Cell 20 mm CM-A99

Glass cell made of optical glass for high precision transmittance measurement of transparent liquids. The optical path is 20 mm and recommended for liquids with low optical density.

Item Order Code: 1864-711

Plastic Cell 2 mm CM-A130

Disposal plastic cell with an optical path of 2 mm. Suitable for transmittance measurements of water based transparent liquids. Recommended for liquids with high density.

Item Order Code: 1870-715

Plastic Cell 10 mm CM-A131

Disposal plastic cell with an optical path of 10 mm. Suitable for transmittance measurements of water based transparent liquids. Recommended for liquids with normal density.

Item Order Code: 1870-716

Plastic Cell 20 mm CM-A132

Disposal plastic cell with an optical path of 20 mm. Suitable for transmittance measurements of water based transparent liquids. Recommended for liquids with lower density.

Item Order Code: 1870-717

Flow Cell CM-A508

For continuous transmittance measurement of transparent liquids. The optical path of the cell is 10 mm and can be used with a pressure up to 2 Bar. The cell fits the Sample Holder CM-A96.

Item Order Code: 9970-237

Target Mask 3 mm CM-A121

Target mask with 3 mm aperture for the measurement of small samples or to measure a limited area of the sample.

Item Order Code: 1870-701

Specimen Viewing Mirror CM-A125

The mirror can be set in the transmission chamber and allows to control the position of the sample for reflectance measurements.

Item Order Code: 1870-705

Petri Dish Set CM-A126

The Petri-Dish set consist of the Target Mask CM-A127, the Calibration Glass CM-A129 and one Petri-Dish CM-A128.

Item Order Code: 1870-710

Target Mask for Petri Dish CM-A127

Special Target Mask with a recess for precise positioning of the Petri-Dish CM-A128.

Item Order Code: 1870-711

Petri Dish CM-A128

Petri-Dish is made of optical glass and provide a optical path of 15 mm. The Petri-Dish is suitable for reflectance measurements of opaque paste, powder, grains and granular materials.

Item Order Code: 1870-712

Petri Dish 50 mm

Petri-Dish made of optical glass for reflectance measurements of paste, powder, grains and granular materials. The optical path of the cell is 50 mm and therefore suitable for opaque and slightly transparent specimen.

Item Order Code: 1870-900

Calibration Glass CM-A129

Glass plate made of optical glass with the same optical properties as the bottom window of the Petri-Dish CM-A128. The Calibration Glass is recommended for white and zero calibration by using the Petri-Dish to increase the accuracy.

Item Order Code: 1870-713

PET Pre-Form Holder CM-A504

The PET-Pre-Form Holder CM-A504 allows a precise positioning of transparent Pre-forms in the transmission chamber of the instrument. The rail guide of the holder allows horizontal movements of the pre-form to define the area for the measurement.